“Navy Arming Surface Ships with Drone Repellent System” –USNI

Posted on September 8, 2021 by Chuck Hill

USCGC Charles Moulthrope (WPC-1141) prior to departure for PATFORSWA

The US Naval Institute News Service has a short post about a system that will reportedly detect and if required jam the radio frequency signals that control small Unmanned Air Systems like the commercially available hobby drones and similar control systems that might be used on larger UAS.

We noted the presence of this or a similar system on the Webber class cutters being transferred to PATFORSWA in February.

While there are autopilots that allow drones to travel considerable distances to reach fixed geographic points, operating drones that lack autonomous targeting, against moving targets, typically require two radio frequencies, one the video link from the drone back to the operator and one to control the drone, from the operator back to the drone. Jamming either of the frequencies would probably disable the drone. Generally these frequencies are UHF or VHF, limited to line of sight.

Gunner’s Mate Kyle Mendenhall shows the Drone Restricted Access Using Known Electromagnetic Warfare (DRAKE) system aboard USS Kansas City (LCS-22) on Aug. 16, 2021. USNI News Photo

If you expand the photo of USCGC Charles Moulthrope above, you can see a similar system, with its two vertical antenna of different sizes, on the mast port side, slightly below and behind the port blue flashing light, and above and inboard of the small round fixed air search radar antenna.

“USCGC Escanaba (WMEC 907) returns home to Portsmouth after historic 50-day patrol” –LANT AREA

Posted on September 7, 2021 by Chuck Hill

Courtesy Photo | USCGC Escanaba (WMEC 907) and USCGC Richard Snyder (WPC 1127) practice maneuvering with the Royal Canadian Navy’s HMCS Goose Bay (MM 707) in the Davis Strait on Aug. 13, 2021. In Operation Nanook, the U.S. Coast Guard seeks to work collaboratively with other international partners to enhance collective abilities to respond to safety and security issues in the High North through the air and maritime presence activities, maritime domain defense, and security exercises. (Photo courtesy Royal Canadian Navy)

Below is an Atlantic Area press release. We discussed Operation Nanook earlier, and it looks like Escanaba is arriving just in time for the triple change of home port ceremony reported earlier today.

News Release

U.S. Coast Guard Atlantic Area

USCGC Escanaba (WMEC 907) returns home to Portsmouth after historic 50-day patrol

Editors’ Note: To view more or download high-resolution photos and b-roll video, click on the photos above.
To see more on Op Nanook please visit Op Nanook 21 on DVIDS by clicking here.

PORTSMOUTH, Va. — The crew of USCGC Escanaba (WMEC 907) returned home to Portsmouth on Tuesday following a historic 50-day patrol in support of Operation Nanook in the Arctic region and the Labrador Sea.

Operation Nanook supports the Coast Guard Arctic strategy to develop international relations with like-minded Arctic states, enhance maritime domain awareness, and expand service capabilities within the region.

Escanaba deployed with the 154-foot Sentinel-class fast response cutter Richard Snyder and an embarked members of the Maritime Security Response Team East. The operation expanded the logistical boundaries of the FRC fleet and further refined the modular capabilities of deployable special forces to enhance a cutter’s organic law enforcement capabilities.

Operation Nanook was made up of two phases, Tuugaalik and Tatigiit. The Tuugaalik phase brought the crews of Escanaba, Richard Snyder, and the Royal Canadian navy together to exercise best practices and demonstrate responsive capabilities to potential terrorist or adversarial threats. The training exercises included were a live-fire surface gunnery exercise, close-quarters formation steaming, towing, small boat approaches, and communication drills. In the following phase, Tatigiit, the Escanaba, and Richard Snyder teams participated in a mass casualty and pollution event along the shores of Baffin Island. Both cutters crews seamlessly supported the Royal Canadian navy in rescue and assistance procedures and creating search and rescue patterns.

In addition to conducting law enforcement operations, Escanaba’s crew participated in Frontier Sentinel, a training event with the U.S. and Royal Canadian navies. The exercise simulated a multi-national response to a maritime threat and strengthened interoperability between all three services.

USCGC Escanaba is a 270-foot Famous-class medium endurance cutter, previously known as “The Pride of Boston, now re-homeported to Portsmouth.

Royal Navy Deploys Two OPVs for Five Years to No Base in Particular

Posted on September 7, 2021 by Chuck Hill

We have deployed cutters to the Western Pacific for months at a time, and PATFORSWA kept its 110s operating out of Bahrain for years, but the Royal Navy seems to be doing something different and I believe remarkable.

Naval News reports they are sending a pair of River Batch II class ships, HMS Tamar and HMS Spey, well beyond the Suez. It sounds all very 18th Century Star Trek, “Our Five Year Mission, Proceed into the Indian and Pacific Oceans and act in the Queen’s Interests.” (No, not a real quote.)

If these ships were in the US Coast Guard we would see them as MECs. They are slightly larger and faster than the 270s, but are not as well equipped in some respects. They are armed only with a 30mm gun and no helicopter hangar. I don’t believe they have any ESM/ECM. Their crew is also considerably smaller, smaller in fact than that of a 210. (I have seen various numbers for the crew size, 34 in the infographic above, 58 in Wikipedia, 46 as reported below, but all well below the 75 common on a 210 or the 100 typical of a 270.)

“Each ship is crewed by 46 sailors, with half the crew trading places with shipmates from the UK every few weeks.”

The Royal Navy actually has considerable experience keeping OPVs deployed for long periods with austere support.

We might even see one of these helping with drug interdiction in the Eastern Pacific, more likely they will be countering piracy and drug or arms trafficing in the Indian Ocean or capacity building in East Africa or SE Asia. Maybe we could make a multi-national Freedom of Navigation transit of the Taiwan Strait.

6 Dazzle paint job for Royal Navy warship HMS Tamar, BBC

“U.S. Coast Guard, Marine Rescue Service Russian Federation meet in Anchorage” –D17

Posted on September 7, 2021 by Chuck Hill

Just passing this along.

Photo Release

U.S. Coast Guard 17th District Alaska

U.S. Coast Guard, Marine Rescue Service Russian Federation meet in Anchorage

Editors’ Note: Click on images to download high resolution version.

ANCHORAGE, Alaska — Members of the U.S. Coast Guard and the Marine Rescue Service Russian Federation held their 43rd joint planning group meeting and exercise Aug. 31-Sept. 2 in Anchorage under the 2020 Joint Contingency Plan of the United States of America and the Russian Federation in Combating Pollution on the Bering Sea and Chukchi Seas.

U.S. Coast Guard representatives from Headquarters, Pacific Area, the 17th District and Sector Anchorage worked with their Russian Marine Rescue Service counterparts to review the Joint Contingency Plan and update a 2021-2023 joint work plan for improving preparedness and cooperation between the U.S. Coast Guard and Marine Rescue Service Russian Federation in spill response in the Bering and Chukchi Seas.

The purpose of this joint work plan is to:

Implement the Joint Contingency Plan (JCP) of the United States and the Russian Federation on combating pollution in the Bering and Chukchi Seas in Emergency Situations.
Develop sustainable infrastructures for marine environmental protection and response to oil and hazardous substance incidents.
Develop greater cooperation and understanding between the United States and the Russian Federation; specifically, between the responsible government agencies and private sector entities that take part in response to oil and hazardous substance incidents.
Develop methods and techniques for preparedness and response to oil and hazardous substance incidents.
Encourage compatibility of response systems in terms of command-and-control techniques, equipment, training, exercises and related preparedness and response issues.
Maintain a two-year work plan cycle to permit efficient planning for budget and personnel scheduling. Identify and address risks associated with the shipment of hydrocarbons across or near the shared maritime boundaries.
Maintain an up-to-date training and exercise schedule.
Identify topics and initiatives for discussion during joint planning group meetings and teleconferences.

The group toured the Alaska Wildlife Response/International Bird Rescue Center and observed an equipment demonstration at Alaska Chadux Network to learn more about response systems and capabilities.

“Meeting our Russian counterparts face-to-face and exchanging information strengthens our shared commitment to environmental protection,” said Rear Adm. Nathan A. Moore, commander 17th District. “The U.S.-Russia maritime boundary is adjacent to heavily-traveled routes for ships carrying hydrocarbons. I rest a bit easier at night knowing that we have developed working relationships with our neighbors and are preparing ahead of time for a pollution incident that we hope does not occur.”

Three 270s Change Homeport from Boston to Portsmouth

Posted on September 7, 2021 by Chuck Hill

“Coast Guard Cutter Forward and Coast Guard Cutter Bear, homeported in Portsmouth, Virginia, finish an at-sea transfer while underway on a two-month patrol. Coast Guard Cutter Forward returned to homeport on April 10, 2021.” (U.S. Coast Guard photo)

Below is a news release offering media access to a triple change of homeport ceremony.

USCGC Spencer (WMEC-905), Seneca WMEC-906), and Escanaba (WMEC-907) are changing homeport from Boston to Portsmouth, VA. Seneca has actually been there for about a year, but guess the ceremony makes it official. It means there are now nine 270 foot WMECs homeported in Portsmouth. The other units of the class are homeported in Kittery, ME/Portsmouth, NH–Naval Shipyard (908, 909) and Key West, FL (910, 913).

Why the change? I suspect to move the ships closer to the Eastern Pacific drug transit zones, to consolidate maintenance for the type, and to put the crews in a lower cost area.

There is also the fact that at least some of the 270s will be going through a service life extension program. When that happens, crewmembers will be transferred either individually or as a unit, and if all the units involved share the same homeport it will be much easier on the crew members and their families, and less costly for the service.

We last looked at homeports here.

united states coast guard

Media Advisory

U.S. Coast Guard 5th District Mid-Atlantic

Coast Guard to hold joint change-of-homeport ceremony in Portsmouth, Virginia

PORTSMOUTH, Va. — The Coast Guard is scheduled to hold a change-of-homeport ceremony at 10:30 a.m., Wednesday at Coast Guard Base Portsmouth.

WHO: Rear Adm. Laura Dickey, Coast Guard Fifth District commander, Capt. John Dewey, commanding officer of Base Portsmouth, Capt. Marc Brandt, master of ceremony, Cmdr. Benjamin Spector, commanding officer of USCGC Escanaba and Cmdr. Corey Kerns, commanding officer of USCGC Spencer.

WHAT: The Coast Guard is holding a joint change-of-homeport ceremony for the U.S. Coast Guard Cutters Escanaba, Spencer, and Seneca.

WHEN: Wednesday, Sept. 8, 2021, at 10:30 a.m.

WHERE: Coast Guard Base Portsmouth, 4000 Coast Guard Blvd., Portsmouth, Va., 23703

Media interested in attending this event are asked to contact the Atlantic Area Command Public Affairs Office at (757) 641-0763.

The USCGC Escanaba (WMEC 907) is a medium endurance cutter previously based in Boston. The ship was launched on Feb. 6, 1985, and formally commissioned on Aug. 29, 1987, in Grand Haven, Michigan, its predecessor’s homeport. Its predecessor, the USCGC Escanaba (WPG 77), sank during WWII and was originally named for the Escanaba River in Escanaba, Michigan.

The USCGC Spencer (WMEC 905) is a medium endurance cutter previously based in Boston. On April 17, 1984, the ship was launched and commissioned on June 28, 1986, in Middletown, Rhode Island. It was named after its predecessor, the USCGC Spencer (WPG 36), a Treasury-class cutter named after John Canfield Spencer, United States secretary of the treasury from 1843 to 1844, who served during World War II was first used for search and rescue off Alaska’s fishing grounds.

The USCGC Seneca (WMEC 906) is a medium endurance cutter also previously based in Boston. On June 16, 1984, the ship was launched and commissioned on May 9, 1987, in Middletown, Rhode Island. It was named after its predecessor, the USRC Seneca (CG 17), a derelict destroyer with the mission to locate and destroy abandoned shipwrecks that were still afloat and a hazard to navigation.

The Famous-class cutters are responsible for various Coast Guard missions, including search and rescue, enforcement of laws and treaties, maritime defense, and protection of the environment. The versatility of the cutter makes it a cost-effective platform in carrying out national objectives.

Media planning to participate in the event must arrive no later than 9:45 a.m. Wednesday and must follow proper CDC guidelines for COVID-19.

More on the New 50mm Chain Gun, and Maybe Counter-UAS

Posted on September 5, 2021 by Chuck Hill

“marauder2048” included a link to this DOD Ordnance Technology Consortium web page in a comment on my earlier post, “Remember the ALaMO,” noting a contract to conduct a “Demonstration Against Unmanned Aerial Systems (UAS) Targets” using the 57mm ALaMO round. But looking through the web site there were some other contract awards that I found interesting, including indications the 50mm program is still progressing. The list includes contracts for both FY 2020 and FY2021.

The following 50mm contracts, totaling $64.39M, were awarded to ATK (Northrop Grumman) in FY2020.

Aug. 2020, 1904 INIT 4096 B, 50 x 228mm High Explosive Airburst, Traced (HEAB-T) Munitions, $44.30 M
Sept. 2020, project 1904 INIT 4104 B, 50 x 228mm Target Practice Munitions, $20.09 M

The following 50mm contracts were awarded to GD-OTS, General Dynamics Ordnance and Tactical Systems, in FY2021:

Oct. 2020, project 1904 INIT 4051 B, 50x228mm Programmable Airburst Ammunition – EMD, $46.42 M
Oct. 2020, project 1904 INIT 4052 B, 50x228mm Target Practice Munitions – EMD, $17.62 M
March 2021, 1904 INIT 4050, XM1203 50mm x 228 Armor Piercing Fin Stabilized Discarding Sabot with Trace (APFSDS-T) Cartridge Engineering and Manufacturing Development (EMD), $25.20 M

There are some interesting awards in other categories as well. There are these contracts for 30mm systems that do not appear related to the 30mm Mk46 currently in the USN inventory. These sales, late in FY2020, could be for foreign military sales:

Sept. 2020, project 1905 INIT 5046 B, MSI-DS Mk113 30mm Naval Gun Weapon System, to MSI-Defence Systems US Inc, for $11.14 M
Sept. 2020, 1905 INIT 5249 B, New Deck Mounted, Stabilized 30mm GunMount, to BAE Systems, for $11.66 M

Then there is this:

Apr. 2020, 101 INIT 0865, Counter Unmanned Aerial System (CUAS) 40mm Proximity Sensor, Electronics Development Corporation (EDC), $4,628,000

This is apparently in reference to the 40mm Mk19 Grenade machine gun, which is, I believe, on the PATFORSWA Webber class WPCs. This could mean it is to be used as a hard kill system against small Unmanned Air Systems, though the Mk19, with its very low muzzle velocity, seems a strange choice for an anti-air weapon.

40 mm Mark 19 on USS Hopper DDG-70 in September 2006. Note the 25 mm Mark 38 in the background. U.S. Navy Photograph 060906-N-9851B-002.

“U.S. Coast Guard Continues to Expand Presence in the Western Pacific” –USNI

Posted on September 3, 2021 by Chuck Hill

August 26, JS OUMI conducted joint training with USCGC Munro in the East China Sea.

The US Naval Institute’s News Service reports on recent Coast Guard activity in the Western Pacific, apparently based primarily on a conversation with Vice Admiral Michael McAllister, Commander Pacific Area and Commander, Coast Guard Defense Force West.

They talk primarily about USCGC Munro’s operations with Japanese and Philippine forces. These included first time underway logistics support provided by the Japanese Maritime Self Defense Force, but there was more. They also discussed cooperation with the China Coast, but the Pacific Area Commander made one particular statement that may portend a new base in the Western Pacific,

“McAllister also provided an update on Coast Guard operations in the Pacific Islands since the July commissioning in Guam of Coast Guard Fast Response Cutters Myrtle Hazard (WPC 1139), Oliver Henry (WPC 1140) and Frederick Hatch (WPC 1143), and the re-designation of Coast Guard Sector Guam to Coast Guard Forces Micronesia Sector Guam.” (emphasis applied–Chuck)

There would not seem to be a reason to apply the designation “Coast Guard Forces Micronesia Sector Guam” unless there were Coast Guard forces in Micronesia somewhere beside Guam. Right now there are none that I am aware of.

I hope to publish something soon to discuss there those forces might be based.

“Coast Guard Polar Security Cutter (Polar Icebreaker) Program: Background and Issues for Congress” –CRS, Updated August 31, 2021

Posted on September 3, 2021 by Chuck Hill

Photo of a model of Halter Marine’s Polar Security Cutter seen at Navy League’s Sea-Air-Space Exhibition have surfaced. Photo credit Chris Cavas.

The Congressional Research Service has once again updated their look at the Polar Security Cutter (heavy icebreaker) program. (See the latest version here.) My last look at this evolving document was in regard to the August 17, 2021 revision.

It appears this new edition was prompted by an update to the projected cost for the program. The following is a note attached to Table 1 (page 6), which I have also reproduced below.

Source: U.S. Navy information paper on PSC program, August 18, 2021, received from Navy Office of Legislative Affairs, August 31, 2021, which states that costs shown are from the PSC program 2020 Life Cycle Cost Estimate.

Table 1. Estimated PSC Procurement Costs
(In millions of then-year dollars)

Cost element 1st PSC 2nd PSC 3rd PSC Total
Target contract price 746 544 535 1,825
Program costs (including GFE) 218 175 228 621
Post-delivery costs 46 47 49 142
Costs for Navy-Type, Navy- 28 28 29 85 Owned (NTNO) equipment

TOTAL 1,038 794 841 2,673

There was also this additional note attached to Table 1.

Notes: Target contract price includes detail design, construction, and long lead-time materials (LLTM), and does not reflect potential costs rising to the contract ceiling price. GFE is government-furnished equipment— equipment that the government procures and then provides to the shipbuilder for installation on the ship. NTNO equipment is GFE that the Navy provides—such as combat weapons systems, sensors and communications equipment and supplies—for meeting Coast Guard/Navy naval operational capabilities wartime readiness requirements. (For additional discussion, see Coast Guard Commandant Instruction (COMDTINST) 7100.2G, May 16, 2013, accessed August 31, 2021, at https://media.defense.gov/2017/Mar/15/2001716816/-1/-1/0/ CI_7100_2G.PDF.)

Below is the one page summary:

Summary

The Coast Guard Polar Security Cutter (PSC) program is a program to acquire three new PSCs (i.e., heavy polar icebreakers), to be followed years from now by the acquisition of up to three new Arctic Security Cutters (ASCs) (i.e., medium polar icebreakers). The PSC program has received a total of $1,754.6 million (i.e., about $1.8 billion) in procurement funding through FY2021, including $300 million that was provided through the Navy’s shipbuilding account in FY2017 and FY2018. With the funding the program has received through FY2021, the first two PSCs are now fully funded.

The Coast Guard’s proposed FY2022 budget requests $170.0 million in procurement funding for the PSC program, which would be used for, among other things, procuring long leadtime materials (LLTM) for the third PSC.

The Navy and Coast Guard in 2020 estimated the total procurement costs of the PSCs in then year dollars as $1,038 million (i.e., about $1.0 billion) for the first ship, $794 million for the second ship, and $841 million for the third ship, for a combined estimated cost of $2,673 million (i.e., about $2.7 billion). Within those figures, the shipbuilder’s portion of the total procurement cost is $746 million for the first ship, $544 million for the second ship, and $535 million for the third ship, for a combined estimated shipbuilder’s cost of $1,825 million (i.e., about $1.8 billion).

On April 23, 2019, the Coast Guard-Navy Integrated Program Office for the PSC program awarded a $745.9 million fixed-price, incentive-firm contract for the detail design and construction (DD&C) of the first PSC to VT Halter Marine of Pascagoula, MS, a shipyard owned by Singapore Technologies (ST) Engineering. VT Halter was the leader of one of three industry teams that competed for the DD&C contract. The first PSC is scheduled to begin construction in 2021 and be delivered in 2024, though the DD&C contract includes financial incentives for earlier delivery.

The DD&C contract includes options for building the second and third PSCs. If these options are exercised, the total value of the contract would increase to $1,942.8 million (i.e., about $1.9 billion). The figures of $745.9 million and $1,942.8 million cover only the shipbuilder’s costs; they do not include the cost of government-furnished equipment (GFE), which is equipment for the ships that the government purchases and then provides to the shipbuilder for incorporation into the ship, post-delivery costs, costs for Navy-specific equipment, or government program management costs.

The operational U.S. polar icebreaking fleet currently consists of one heavy polar icebreaker, Polar Star, and one medium polar icebreaker, Healy. In addition to Polar Star, the Coast Guard has a second heavy polar icebreaker, Polar Sea. Polar Sea, however, suffered an engine casualty in June 2010 and has been nonoperational since then. Polar Star and Polar Sea entered service in 1976 and 1978, respectively, and are now well beyond their originally intended 30-year service lives. The Coast Guard plans to extend the service life of Polar Star until the delivery of at least the second PSC. The Coast Guard is using Polar Sea as a source of spare parts for keeping Polar Star operational.

On August 18, 2020, an electrical fire occurred in one of Healy’s main propulsion motors as the ship was 60 miles off Seward, AK, en route to the Arctic. As a result of the fire, the ship’s starboard propulsion motor and shaft became nonoperational. The ship canceled its deployment to the Arctic and returned to its homeport in Seattle for inspection and repairs.

“Arctic Security Cutters: Regionally Named, Globally Deployed” –US Naval Institute Proceedings

Posted on September 2, 2021 by Chuck Hill

HMCS Harry DeWolf in ice (6-8 second exposure)

The August, 2021 issue of US Naval Institute Proceedings has an article, that is the first I have seen to discuss the roles that should be expected of the “Arctic Security Cutters,” the Coast Guard’s planned Medium Icebreakers.

The article is available on line. I am not sure if or for how long it will be accessible to non-members.

The thrust of the article is that these ships should not be limited to deployments in the Arctic. That they have important roles in Antarctica and might also be used for domestic icebreaking, particularly in the Great Lakes during unusually severe winters, or if the Great Lakes icebreaker Mackinaw should suffer a casualty. I have suggested something similar before. It is also likely we will have reasons to operate in the Arctic entering from the Atlantic side.

This would require a homeport on the East Coast, perhaps Newport, Boston, or Kittery, ME. It would mean the ship would have to fit through the locks from the St. Lawrence to the Lakes and between the lakes.

To qualify as a “Medium Icebreaker” in the Coast Guard lexicon, the ships would have to have propulsion motors totaling 20,000 HP or more, meaning it will be more powerful than the Canadian DeWolf class Arctic Offshore Patrol Ships, like the one pictured above.

The author suggests a design evolved from the Wind class Icebreakers. These were very successful ships, but the design is about 80 years old, so we can certainly do better. Even so, the successful use of the Wind class globally shows what can be done with a design smaller than the planned Polar Security Cutters.

That the Coast Guard continues to claim a requirement for a medium icebreaker class rather than simply building more Polar Security Cutters may mean they have recognized a need for a smaller ship, perhaps one that could operate in the Lakes or in shallower water than might be accessible to the PSC.

Questions remain regarding the expectations of the class. How will it be armed, and what sensors will it be equipped with? I would anticipate an outfit similar to that of the Offshore Patrol Cutters, but that is yet to be seen. Should it be capable of operating more than a single helicopter? UASs? USVs? Space and utilities to support containerized systems? Space for a SCIF? I look forward to hearing more about this class.

“U.S. Coast Guard concludes training with Philippine maritime agencies” –Pacific Area

Posted on September 2, 2021 by Chuck Hill

U.S. Coast Guard trains with Philippine maritime agencies

U.S. Coast Guard Cutter Munro (left) and Philippine Coast Guard Offshore Patrol Vessel Gabriela Silang (right) render honors to each other following bilateral operations and exercises Aug. 31, 2021, in the West Philippine Sea. The Munro and crew are currently deployed to the Western Pacific Ocean to strengthen alliances and partnerships and improve maritime governance and security in the region. (U.S. Coast Guard photo by Marine Corps Sgt. Kevin G. Rivas)

Passing along a Pacific Area news release. More photos here. Recently read USCGC Munro had completed an Underway Refueling from a Japanese Maritime Self Defense Force Vessel (Thanks to Paul). Of course this upset the Chinese. They seem to be perpetually upset.

News Release

U.S. Coast Guard Pacific Area
Sept. 1, 2021

U.S. Coast Guard concludes training with Philippine maritime agencies

Editors’ Note: Click on images to download high resolution version.

ALAMEDA, Calif. — The U.S. Coast Guard Cutter Munro (WMSL 755) arrived in Subic Bay, Philippines, Tuesday following operations and exercises in the West Philippine Sea with the Philippine Coast Guard and the Philippine Bureau of Fisheries and Aquatic Resources.

Munro’s crew participated in bilateral operations, professional exchanges, search-and-rescue and communications exercises, small boat operations, multi-vessel maneuvering, and maritime domain awareness drills while at sea.

“As the maritime security challenges in the Indo-Pacific region become increasingly complex, partnering with our Philippine Coast Guard and fisheries counterparts is vital to our shared interest in a free and open maritime environment,” said Munro’s Commanding Officer Capt. Blake Novak. “We thoroughly enjoyed our Philippine hosts’ professionalism and hospitality, and we look forward to future bilateral operations to further our longstanding relationship.”

The search-and-rescue exercise simulated the agencies’ bilateral response to a vessel in distress. During the exercise, the Munro, PCG, and BFAR practiced searching for the distressed vessel, shipboard firefighting techniques, and recovering and treating persons in the water. As part of the exercise, members of the PCG joined USCG members aboard Munro as they launched the cutter’s Small Unmanned Aircraft System to aid in the search-and-rescue response. The day’s exercises and operations provided opportunities for each involved agency to learn from each other.

“The success of the joint maritime exercise between the PCG and USCG will not only strengthen international partnerships for immediate response to calamities and disasters but will also ensure that our personnel could effectively perform their mandated functions in countering terrorism and other acts of lawlessness in our country’s waters,” said Admiral George V. Ursabia JR., PCG commandant.

The USCG has a long history of cooperation with the PCG. In 2019, the Coast Guard Cutter Bertholf conducted engagements with the PCG as part of its Western Pacific deployment, focusing on search and rescue, maritime security, and law enforcement capabilities.

Munro, a 418-foot national security cutter, departed its homeport of Alameda, California, in July for a months-long deployment to the Western Pacific. Operating under the tactical control of U.S. 7th Fleet, the cutter and crew are engaging in professional exchanges and capacity-building exercises with partner nations and are patrolling and conducting operations as directed. National security cutters like Munro feature advanced command and control capabilities, aviation support facilities, stern cutter boat launch, and increased endurance for long-range patrols, enabling the crews to disrupt threats to national security further offshore.

“The Coast Guard shares deep and abiding interests with our allies and partners, who, like us, have long endorsed a rules-based international order,” said Vice Adm. Michael F. McAllister, commander, U.S. Coast Guard Pacific Area. “Partnering with the Philippines to enhance maritime governance, including important missions such as search and rescue and enforcement of fisheries laws and treaties, is essential to the security, stability and prosperity of all nations.”

As both a federal law enforcement agency and an armed force, the USCG is uniquely positioned to conduct defense operations in support of combatant commanders on all seven continents. The service routinely provides forces in joint military operations worldwide, including the deployment of cutters, boats, aircraft, and deployable specialized forces.

More photos from Munro’s Western Pacific deployment are available here. Subscribe here to receive notifications when new photos are added.